How To setup A Stainless Steel Backsplash In 7 Easy Steps

How To setup A Stainless Steel Backsplash In 7 Easy Steps

Ready to take on that Diy steel backsplash scheme you've been planning for a while now? Then now is the time to do it! Full of modern petition and functionality, installing a stainless steel backsplash can be done in just a few hours, at a minimal remodel cost. Before you order your materials you will need to make some measurements.

To do this, shut off the power to outlets around your sink, and take off any outlet covers or plates. Tape a large piece of paper against the wall behind your sink, and then cut the template down to the size you want your backsplash to be. Be sure to cut out holes for any outlets. Remember to cut very thought about and precisely, because this template will be used to institute the final stainless steel backsplash. Take your template to a sheet metal or home revising store, and order the product. You may want to take photos of the area it will be going in as well.

Sandpaper

When it comes in, derive the following materials:

• Tape, either masking or painters

• Caulking gun and waterproof caulk for kitchen use

• A putty knife

• building glue or other adhesive

• 80 grit sandpaper

• Rubbing alcohol

Step 1:

Use sandpaper on the wall where the backsplash will be placed, to originate a good face for adhesive to stick to.

Step 2:

Run a bead of building glue along the back side of the backsplash, and use the putty knife to spread the glue evenly.

Step 3:

Position the backsplash close to the wall. Start at one end and thought about level the steel against the wall, using either the side of your hand or a flat tool such as a spatula.

Step 4:

Tape the backsplash in place until the adhesive has dried fully.

Step 5:

Remove the tape, as well as any adhesive from around the edges. You can do this with rubbing alcohol.

Step 6:

Run a bead of waterproof caulking along the edges of the backsplash, and either leave them as beads, or level them into place with your finger. Let the caulking dry thoroughly before using the sink.

Step 7:

Use any decorative ideas you've gathered for making it personal. For example, you might want to make it a gallery for displaying magnets.

I hope this has given you some helpful tips to find and setup a stainless steel backsplash yourself. At the end of the day it will be a great option as it is so easy to clean and maintain, and looks incredibly popular ,favorite as well.

How To setup A Stainless Steel Backsplash In 7 Easy Steps

Check Price on - Sandpaper Products
==================== Products By Amazon ====================

Fall Arrest Kits Safety & Security - Fall Protection Equipment - Professional Roofer,US Safety Portable Stereo Speaker Case USB - USB Powered Portable Stereo - USB MP3 Player - Notebook Speakers